Carbon Fiber Decal Sheet A5 v.003

Carbon Fiber Decal Sheet A5 v.003

Tap for gallery

4.0 average, based on 1 reviews


Product Information
  • Suitable for customizing exterior and interior 1/24th scale models
  • The generous sheet size (A5) allows the customization of several models;
  • The decals are printed in high quality film, ensuring best performance over well prepared surfaces;
  • Tested with mainstream setting solutions;
  • The fiber pattern is printed in greyscale on clear film, which ensures a high level of customization and can be used to detail the interiors as well:

  • The carrier film is very fine and conforms to compound surfaces

Quick guide to applying decals:

  1. Draw the template contour using the part which you intend to customize directly on the back of the decal sheet; if not possible, make a template using masking tape and stick it to the back of the decal sheet;
  2. Cut the template from the sheet - we strongly recommend to use a new hobby blade; using scissors may lead to frayed or corrupted  edges;
  3. Dip decal in tepid water for 30 seconds or more - the decals are ready to be applied when they slide easily from the backing paper;
  4. Make sure the surface where the decals are to be applied is wet, lint and dust free and perfectly smooth, preferably with a high gloss finish (silvering may appear over matte surfaces);
  5. Slide the decal from the paper on the part to be customized - try to accomplish that with as less movements as possible, otherwise you may crease the decal and achieve hart to eliminate imperfections;
  6. Using a q-tip or a wide tacklon brush eliminate the water and the air bubbles from under the decal;
  7. You may use a hair drier or setting solutions to help the decal conform over the compound surfaces - we recommend to do that patiently. Do not over-expoze the decal film to heat!
  8. Clear coat the decal for permanent setting once well dry and cured (acrylic, enamel, urethane and 2K clear tested and compatible);
  9. Enjoy yout gorgeous looking model!*

*Body painted with Rust-oleum copper enamel, clear coated with 2K and decal wrapping applied with the help of MicroSet and Tamiya Mark Fit Strong.

Product CodeBLDCF03
Stock Level10

Customer Reviews

Average Rating: 4

Just as good as it gets

I have used threaded carbon fiber decal for detailing the spoiler of my racing car. Works neatly. Just be careful when leveling the decal on the surface: if you press to hard across creases you may scratch the design - it happened to me once. Price very good for the amount you get. Happy Modelling! Bubba The Car Maniac (16 Jun 2019, 13:26)
Write a review

Write Review

Please enter a valid email address.
This field is required.

©2020 - All rights reserved.

Follow Us

Mailing List

Enter your e-mail address to receive our newsletter
Please enter a valid email address.
Email address already subscribed. Continue if you wish to unsubscribe.

©2020 - All rights reserved.

eCommerce by CubeCart